This allows control 2 users to send different midi program change numbers than it receives which can. DigiTech warrants this product, when used solely within the U.S. Another option would be to glue the cable in, but if something goes wrong then, it's pretty much over. Digitech devices it sees connected to the computer. The Digitech Control 2 is a remote foot controller designed to work with the Digitech GSP1101 rackmount guitar processor. Do not connect the Control 2 Remote Foot Controller to Ethernet connections as damage will occur. I'm looking for a permanent fix, either to hardwire the cable to the board and connect the wires separately to the board, or to replace the not-so-roadworthy cat5-connection with something sturdier (like 5-pole XLR), and wire that to the board - at least on the Control 2-side, as the GSP is in a rack and is a lot safer from stumbling beer drinking fools (including yours truly). Only connect the Control 2 Remote Foot Controller to the GSP1101 or other DigiTech products which specify a connection to the Control 2. I have opened the unit up, but couldn't find any broken or loose bits around the socket.ĭoes anyone have similar experiences? And does anyone know how many of the 5 or 6 internal wires of the cat5-cable are actually in use? One for power, one for ground I guess, maybe two or three more?

I have tried different UTP-cables with different plugs, but the problem stays - so must be the socket. The past few gigs I've just taped the connector into the socket, but this is no permanent fix of course. Which is a nuisance, especially when playing live. To get around it, I have to unplug the cable and plug it back in, and make sure it doesn't move again. HARMAN International is a global leader in connected car technology, lifestyle audio innovations, design and analytics, cloud services and IoT solutions. The unit stays powered, but none of the buttons work and the GSP stays at the same preset it was. The cable snaps in the Control, but it has some room to move, and if I do that, the connection is lost. Never had any issues with it, except lately the cat5-socket with which to connect the cable between the Control 2 to the GSP seems faulty.

I've been using the excellent Digitech GSP1101 in combination with the Control 2 for a few years now.

Digitech control 2